Chilling Plant 250 Ltr.

DESCRIPTION:-

1.       Capacity: - 250 Liter/Hr

2.       Condensing Unit Body: G.I Powder Coated (7 Tank Pre Treated- Anti Corrosion)

3.       Compressor Type: - Hermatic Sealed

4.       Compressor Make: - Emerson / Tecumseh

5.       Heat Load Rejection :- 4700 Kcal/hr Max.

6.       Design Ambient Temperature: - 45 Deg C

7.       Thermal Difference:- @ 50 LPM – 5 Degree C @ 25 LPM – 10 Degree C

8.       Power Consumption: - 1.9 Kw

9.       Refrigerant: - R 22 / R 404

10.   Power Supply: - 415 Volt, 50 Hz, Three Phase

11.   Plate Heat Exchanger: - 12 Degree Inlet / 7 Degree Outlet,

12.   Water Mass Flow Rate 0.2509 Kg/Sec,
Connection Size In/Out- 25/25 Mm

13.   Water Flow Sensor:- Honeywell Make or Chiller controller with freezing sensor

14.   Chilled Water Pump: - 0.5 Hp (Self Lubricated, Stainless Steel)
i) Water Flow Rate :- 50 LPM, ii)Water Pressure :- 2-3 Bar

15.   Piping Connection & Fittings Food Grade C Pvc - Dutron Make

16.   Storage Tank: - Plastic 2 Layer- 300 Liter (With 10 mm Thick Neoprene Rubber
Insulation)

17.   R.O. Plant for Chiller:- 250 Liter/hr

CONTROL PANEL FUNCTIONS:-

1)     High voltage & under voltage protection, Indication on Panel like – Power on, compressor, overload trip, Overload protection for compressor, Indication of voltage and ampere on panel.

TEMPERATURE CONTROLLER FUNCTION

Ø  Temp. Setting- Display of set temp. & actual temp., Min. set point & max. set point, Time delay for startup & compressor restart, Anti short cycle delay, Temp. Measurement unit in Deg.C/ Fahrenheit

Ø  Auto/manual defrost, Hot key function for setting parameters upload & download hidden menu for set Parameters, Key Lock Pad & Relay status on probe failure